Part Number (MPN)
336-1663
Brand
ACDelco
UPC / GTIN
707773037881 / 00707773037881
Case Grounding
Grounded Case
Design
Offset Gear Reduction
FAQ - Answer 1
Yes. It is included where the design of the starter requires a solenoid.
FAQ - Answer 2
Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Answer 3
No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive make appropriate contact with the flywheel.
FAQ - Question 1
Is the solenoid included?
FAQ - Question 2
Can I be assured that the unit will last, especially in extreme weather?
FAQ - Question 3
Do I always need a starter shim?
Features & Benefits - Bullet 1
Remanufactured using consistent quality processes; not just rebuilt
Features & Benefits - Bullet 2
Starters have new bronze sintered and oil-impregnated armature bushings
Features & Benefits - Bullet 3
Solenoid contacts are new with copper terminals and plated hardware
Features & Benefits - Bullet 4
Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications
Good Maintenance Practices - Section 1 - Bullet 1
Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 2
Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 3
Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4
It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Meets or Exceeds Original Equipment Manufacture Specifications
Yes
Mounting Bolt Hole Quantity
2
Mounting Flange to Pinion End at Rest
33.0
Mounting Hardware Included
No
Mounting Shims Included
No
Nose Cone Material
Aluminum
Power Rating
1.0<br />1.34
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bullet 3
Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - Header
Indicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - Section 2 - Bullet 1
Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bullet 2
Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bullet 3
Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bullet 4
Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - Header
Other vehicle parts that might cause related starter problems include:
Starter Rotation
Clockwise (Right)